• PTFE Lined equipment’s
  • PTFE Thread Seal Tape
  • PTFE Machined Components & Parts
  • PTFE Envelop Gaskets
  • PTFE Ready Cut Solid Gaskets
  • PTFE O-ring's, and crescent Rings
  • PTFE Bellows / Expansion Joints

PTFE MOLDED SHEETS

PTFE molded sheet is manufactured by molding method with PTFE granular resin. PTFE is the most chemical resistance of all known plastics. It does not age. It has the lowest coefficient of friction of all known solid materials and a wide range of practicable temperature from -180degree +260 degree

Standard size : 300mm x 300mm, 450mm x 450mm, 600mm x 600mm, 1000mm X 1000mm,
1200mm x 1200mm, 1500mm x 1500mm

Thickness : 3mm to 25mm

Material : Virgin PTFE and Filled PTFE

Available Grades : Virgin PTFE, Peek PTFE, Glass Filled PTFE, Carbon Filled PTFE, Graphite Filled PTFE

Special Grade As Per Customer Specification

All Nonstandard Sizes Available As Per Customer Specifications

PTFE Molded Sheets

Click to Request a Quote

PTFE SKIVED SHEETS

Skived PTFE sheet is manufactured by technology of compacting, sintering, rotary cutting with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of skived PTFE sheet has similar friction levels to ice. Skived PTFE sheet can work at -180°C ~+260°C and is the best electrical insulator of all known plastics.

Skived PTFE sheet can be used as lining, seal components, wire isolation, slide block, gasket, seal, dielectric material, etc.

Standard Sizes: Standard Width: 300mm, 450mm, 600mm, 1000mm, 1200mm, 1500mm, 2000mm

Thickness: 0.25mm to 6mm

Length: Available in Roll Form in any length

Made to Order: Specific Length, Width & Thickness available as per customer’s requirements

Material: Virgin PTFE & Filled PTFE

Available Grades : Virgin PTFE, Glass Filled PTFE, Carbon Filled PTFE, Graphite Filled PTFE Special Grade as per customer specifications

PTFE Skived Sheets

Click to Request a Quote

PEEK PRODUCTS

PEEK polymer is a plastic which acts as an alternative to metal. We have explored the properties of PEEK that make its products versatile across a range of applications

Virgin PEEK is available in various shapes such as solid plain sheets, solid round bars and cylindrical bushes. PEEK Product like ROD, sheets, tubes and machined componets in various sizes are also available as per customer's requirements.

Applications:

  • Pump Components
  • Bearings
  • Compressor Valve Plates
  • Piston Parts

Specifications:

  • Material: PEEK
  • Size: According to customer requirement
  • Tolerance: +/-0.005
PEEK PRODUCTS

Click to Request a Quote

PTFE EXPANDED SHEET & GASKET

Expanded PTFE gasket sheet is made of 100% expanded PTFE by using special process that produces a uniform and highly fibrillated microstructure with a great lot of fibres running in multidirectional.

These create a soft and pliable, yet very tough gasket that has excellent resistance of pressing, creep relaxation and cold flow.

Expanded PTFE gasket sheet is ideal for rough and/or damaged flange faces and having excellent, universal resistance against wide range of acid, alkali, chemical, oil and solvent.

PTFE EXPANDED SHEET & GASKET

Click to Request a Quote

PTFE GASKETS

PTFE Gaskets are manufactured using top quality raw material like Virgin PTFE, Modified PTFE, Pigmented and Filled PTFE Specific Length, outer dimension and inner dimension available as per customer's requirements.

GLAND PACKING

Click to Request a Quote

PTFE MOLDED ROD

PTFE has the highest melting point and is capable of continued service at -180 to + 260 C. PTFE is a melt process able resin capable of continued service at 204 C. PTFE products are used as gasket and packing materials in chemical processing equipment; as electrical insulation for maximum readability; and in bearings, seals, piston rings and other mechanical applications, especially those require anti-stick characteristics. PTFE has excellent thermal and electrical insulation properties. it has a low coefficient of friction.

Applications: Widely used in Gasket, Valve packing's, Diaphragms and mechanical seals, linings of pipes, valves, Pumps and vessels .Chemical, Machinery field’s .Electrical insulation parts.

Product Ranges: PTFE Molded Rod: Diameter 5 mm to 400mm, standard length 300mm/500 mm/1000 mm

Note: PTFE Rods can be customized as per requirements.

PTFE MOLDED ROD

Click to Request a Quote

PTFE EXTRUDED ROD

PTFE has the highest melting point and is capable of continued service at -250 to +260 C. PTFE is a melt process able resin capable of continued service at 204 C. PTFE products are used as gasket and packing materials in chemical processing equipment; as electrical insulation for maximum readability; and in bearings, seals, piston rings and other mechanical applications, especially those require anti-stick characteristics. PTFE has excellent thermal and electrical insulation properties. it has a low coefficient of friction.

Applications: Widely used in Gasket, Valve packing's, Diaphragms and mechanical seals, linings of pipes, valves, Pumps and vessels .Chemical, Machinery fields .Electrical insulation parts.

Product Ranges: PTFE Extruded Rod: diameter 3mm to 300mm, standard length 1000mm;

Note: PTFE Rods can be customized as per requirements

Fillers: Fiberglass / Carbon / Graphite / Bronze / MOS2

PTFE EXTRUDED ROD

Click to Request a Quote

PTFE BUSHES

PTFE Bushes are manufactured using top quality raw material like Virgin PTFE, Modified PTFE, Pigmented and Filled PTFE Specific Length, outer dimension and inner dimension available as per customer's requirements.

Product Specification:

  • Outer Diameter : 15 to 900 mm
  • Inner Diameter : 10 to 700 mm
  • Standard Size Length : 100 mm to 1000 mm
PTFE BUSHES

Click to Request a Quote

PTFE TUBES

Extruded/Molded PTFE Pipe has wide range of practicable temperature from -250oC to +260o C and a wax-like surface to which anything hardly sticks. Filled PTFE tube is made with filled (reinforced) to enhance the performance parameters of PTFE. Specific Length and Diameter available as per customer’s requirement.

Product Ranges: OD- 20 mm upto 300 mm, ID-10 mm upto 275 mm

Note: PTFE Tubes can be customized as per requirements

PTFE BUSHES

Click to Request a Quote

PTFE LINED PIPE & EQUIPMENT’S

PTFE lined pipe is made with a thermally locked is statically molded PTFE liner fitted into a seamless ASTM A-106 Gr. B schedule 40 pipe. Isostatic ally molded PTFE liner provides full vacuum rating throughout the entire temperature range.

Pipe: ASTM A 106 Grade B, In compliance with ANSI B 36.10

Steel Pipe: According to schedule 40 from 25NB to 150NB, schedule 30 from 200NB to 250 NB and schedule 20 for 300 NB

Flange: IS 2062 Grade B, ANSI B16.5 ASA150 # for drilled holes

Standard Lengths: 100/150/200/300/400/500/000/1500/2000/3000mm

Lining: Pure PTFE in compliance with ASTM D 1457, white in color

Lining Thickness: 3 to 8 mm exceeds the relevant ASTM F-1545 standard specs

Operating Temperate : -29oC to 260oC

Operating Pressure : up to 6 kg / cm2

PTFE LINED PIPE & EQUIPMENT’S

Click to Request a Quote

PTFE MACHINED COMPONENTS & PARTS

Machined Components & Parts are avaliable as per customer’s drawings & specification in Pure, Carbon, Glass, Bronze, Graphite filled Teflon such as Envelop Gaskets, Ready Cut Solid Gaskets, 'O-ring's, and crescent Rings, Bellows/ Expansion Joints, T Bush, Washers, Plugs, Bearing Bush, Flanges, PTFE Pulley, PTFE Ball and PTFE Ball Valve

PTFE Machined Components & Parts

Click to Request a Quote

PTFE ENVELOP GASKETS

Envelope gaskets consist of an enclosure, commonly called an envelope, which can be made from the more common virgin PTFE and filled PTFE (silica, graphite or other). The thickness of the envelope is usually 0.5 mm

Envelops Gaskets, Ready cut Gaskets, Flange Gaskets available as per customer specifications & as per ASA # 150 / ASA # 300

Usage / Application: Chemical, petrochemical, pharmaceutical and mechanical industries, flanges, tanks, columns, glass tanks, stainless steel reactors, reactors, enamel-coated tanks.

Sizes: As per Customer requirement (oval, circular and as per design).

PTFE Machined Components & Parts

Click to Request a Quote

PTFE O-RING'S & CRESCENT RINGS

Virgin PTFE O-Ring special engineering plastic mechanical seal

Usage / Application: Industrial

Sizes: As per Customer requirement

PTFE O-RING’S, & CRESCENT RINGS

Click to Request a Quote

PTFE BELLOWS / EXPANSION JOINTS

PTFE expansion joints-bellows main applications are in the sector of corrosive fluid transport, and they are generally used as connection elements on plants where there is a need to compensate for expansion, vibration or movement of piping. They are also used to protect pistons and rotating shafts in the presence of corrosive vapours.

Applications: Pharmaceutical, food, chemical and petrochemical industries.

Sizes: As per Customer requirement

PTFE O-RING’S, & CRESCENT RINGS

Click to Request a Quote

PTFE VALVE / PUMP COMPONENTS

PTFE / Teflon machining parts for Valves and Pumps ( Valve Seat, Gland Packing, Butterfly Valve Sleeves, Stem Seal ) are supplied per Customer requirement generally based on drawings. We deliver the best quality range of PTFE Valve and pump Component.

Our Ptfe Machined Components Consists Of Valve Seat, Gland Packing, Butterfly Valve Sleeves, Stem Seal, Seat Rings, Roof Packing, Seal Cover, Plug Valve Sleeve, Wedge Rings, 'O' Rings, Washes, Bearings, Balls, Bushings, Pipe Joints.

PTFE VALVE / PUMP COMPONENTS

Click to Request a Quote